LAB DESCRIPTIONWelcome to the Aerospace Wind Tunnel Laboratory at USM, Engineering Campus. The lab is equipped with a low speed subsonic, closed circuit wind tunnel with a rectangular test section of 0.8 m x 1.0 m x 1.8 m, top speed of 80 m/s with turbulence level around 0.1%. We have a 6-component internal balance capable to measure aerodynamic loads, a pressure scanner for pressure measurements and smoke wire systems for flow visualization analysis. Specially-designed quadrant mechanism is installed underneath the test section to allow for control on the pitch and yaw. In addition, a traversing system is mounted on the roof of the test section to allow for movement in 3 directions (upward/downward, stream wise and cross wise) for flexibility to cater for any experimental arrangements. All movement systems can be controlled either manually or automatically from the control room. The test section floor is movable to accommodate various wind tunnel testing configuration. The wind tunnel facility is also fully utilized for the undergraduate studies under OEL (Open-Ended Lab) Course to provide broad experience and exposure for the student’s development.
|
|
LAB MANAGERThis email address is being protected from spambots. You need JavaScript enabled to view it. |
|
Assistant engineers
Mr. Mohamad Najhan Awang Mr. Mahmud Isa Mr Nor Ridwan Mohamed Yusuf
|
|
SERVICES & CONSULTATION
The lab provides wind tunnel testing to measure aerodynamic loads, flow visualization analysis and pressure measurement for wide range of application such as:
We welcome all visitors from universities, government or private industries and will try our best to accommodate your request. We offer special rate for wind tunnel testing and discount rate for research purpose. If you have special requirements or need further information, please do not hesitate to contact us. |
|
contact
Dr Noorfazreena Phone : 04-5995909 |
|
|
|
